Composite Decking Fixing Clip Kit
- Hidden fixing system
- Installs 10m2 of Composite decking
- 180 clips & 180 screws
- 5 starter clips
- 1 screw drive bit
- Suitable for all our ranges
Composite decking fixing clips are an innovative T-shaped style of clip which acts as a hidden fastening system. They work in between the deck boards, leaving an incredibly clean finish with absolutely no screws showing.
If you want to take your outdoor decking to the next level, then composite decking clips are undeniably what you need to help you achieve that. They will help to create a flawless finish for all of your outdoor composite decking needs.
Clips are required on every joist and joist should be spread to a maximum of 400mm centre to centre.
Starter clips are used to start the area off and we recommend spreading these every 600mm to start your run of composite decking off. Starter clips can also be used on the last board by free laying the last 2 boards to mark where the last board will finish, marking with a pencil and the lifting the 2 boards up and screwing from the starter clips.
Also included in each fixing kit is a screw driver pit for your hand held electric screwdriver. This is very useful as it fits perfectly between the boards to eliminate and damages to the boards whilst tightening up.