Products

Our 10mm coloured toughened glass panels are suitable for our Semi Frameless, Post & Rail and Spigot Balustrade Systems. Available in Frosted, Green, Grey and Bronze, each panel is cut to size and supplied with polished edges and dubbed corners for added safety. Priced...

10mm clear toughened glass made to measure for our semi-frameless and post & handrail glass balustrade systems, for runs that cannot be set out with our stock-size panels. Made to measure Made-to-measure glass is priced per linear metre of run, rounded up to the...

Toughened glass panels in stock sizes, held in two heights and nine widths. Because these are standard sizes rather than cut to order, they are dispatched in 3–10 working days instead of the 3–4 weeks a made-to-measure pane takes — and they cost less....

12mm clear toughened glass panels in stock sizes, 1087mm high in seven widths. Because these are standard sizes rather than cut to order, they are dispatched in 3–10 working days instead of the 3–4 weeks a made-to-measure pane takes. 12mm glass is a step...

17.5mm clear toughened laminated glass panels in stock sizes, 1087mm high in seven widths. Because these are standard sizes rather than cut to order, they are dispatched in 3–10 working days instead of the 3–4 weeks a made-to-measure pane takes. Laminated glass is the...

The black 180° glass stiffener creates an in-line joint between two neighbouring glass panels on a straight run, tying them together for extra rigidity with minimal visual interruption. Made from black powder-coated aluminium, in versions for 12–13.5mm or 15–17.5mm glass. Stiffeners work with our...

The satin 180° glass stiffener creates an in-line joint between two neighbouring glass panels on a straight run, tying them together for extra rigidity with minimal visual interruption. Made from brushed Duplex 2205 stainless steel, in versions for 10–12mm, 13.5–15mm or 17.5mm glass. Stiffeners...

21.5mm clear toughened laminated glass panels in stock sizes, 1087mm high in seven widths. Because these are standard sizes rather than cut to order, they are dispatched in 3–10 working days instead of the 3–4 weeks a made-to-measure pane takes. Laminated glass is the...

The 90° Corner Channel (Anodised Finish) delivers seamless alignment between adjoining channel runs in frameless balustrade installations. It is designed for both internal and external corners, supporting glass thicknesses between 15 mm and 21.5 mm. Manufactured from structural aluminium and treated with an anodised...

The 90° Corner Channel (Black Finish) is a precision-formed connector used to join frameless balustrade channels at right angles. Designed for both internal and external corners, it accommodates 15 mm to 21.5 mm glass panels and maintains perfect alignment across angled runs. Manufactured from...

The black 90° flush angle scroll end is the finishing piece for the handrail. Wherever a run of 42.4mm tube finishes in the open — rather than at a wall or around a corner — the scroll end inserts into the open tube end...

The satin 90° flush angle scroll end finishes an open handrail end in the uncoated 316 range. It inserts into the open end of the 42.4mm tube and turns the last section through a smooth 90° curve, closing the run off neatly instead of...

The black 90° glass stiffener joins two glass panels at a right angle, bracing the corner so both panels stay aligned and rigid without adding posts. Made from black powder-coated aluminium, in versions for 12–13.5mm or 15–17.5mm glass. Stiffeners work with our spigot glass...

The satin 90° glass stiffener joins two glass panels at a right angle, bracing the corner so both panels stay aligned and rigid without adding posts. Made from brushed Duplex 2205 stainless steel, in versions for 10–12mm, 13.5–15mm or 17.5mm glass. Stiffeners work with...

The black 90° handle for glass carries our slotted cap rail around a right-angle corner, keeping the rail line continuous where the balustrade turns. It is a pre-formed corner in the same 30 × 28mm profile as the straight rail, powder-coated black, so there...

The satin 90° handle for glass carries our slotted cap rail around a right-angle corner, keeping the rail line continuous where the balustrade turns. It is a pre-formed corner in the same 30 × 28mm profile as the straight rail, in satin anodised aluminium,...

The black 90° round elbow joins two lengths of 42.4mm handrail tube at a right angle. It fits directly into the tube ends with no post mount, so the corner can sit wherever the run turns — at a return, around a column or...

The satin 90° round elbow joins two lengths of 42.4mm handrail tube at a right angle. It fits directly into the tube ends with no post mount, so the corner can sit wherever the run turns — at a return, around a column or...

The black adjustable elbow is an in-line pivot for the handrail itself. It joins two lengths of 42.4mm tube directly — no post mount involved — and its pivoting joint lets the rail change angle mid-run, which is exactly what happens where a level...

The satin adjustable elbow puts a pivot directly into the handrail. It joins two lengths of 42.4mm tube in-line, letting the rail bend to a stair pitch, a ramp or an off-square turn without any post-mounted hardware at that point. It is uncoated 316...