Build your own complete aluminium balustrade kit — a modern metal balustrade system you configure yourself, with exactly the posts, rails, brackets, spacers and end caps your project needs. Add an optional matching aluminium gate for access or safety. Our outdoor balustrade system suits...
Our aluminium balustrade rail kit contains everything you need for the rail sections of your balustrade — the horizontal part of the system that spans between your posts. Each kit includes the top and bottom rails (with vinyl inserts), pickets, spacers, top and bottom...
Our aluminium balustrade post is the structural upright of the balustrade system — a 75mm × 75mm square post finished in black powder-coated aluminium for a clean, modern look that won't rust, rot or fade outdoors. Each post stands 1140mm to the top of...
Spread the cost — pay in 3 interest-free instalments with PayPal Pay in 3.
Delivery: £60 to most UK mainland — free on orders over £2,000. Dispatched within 2–5 working days;
exact cost confirmed at checkout by postcode. Full delivery & returns details →
Our aluminium balustrade stair brackets let your rails sit at an angle so the railing can follow the pitch of your stairs. Where standard brackets hold rails horizontally, these stair brackets pivot to match the slope of your steps, so your balustrade runs neatly down a staircase between the top and bottom posts.
To fit a balustrade to stairs, position a post at the top and bottom of your stair run, then use the stair brackets to connect the rails at the angle of your steps. Measure your stair run along the slope — post to post, following the pitch — rather than horizontally. You'll need one stair bracket kit per rail on the stair run, and if a run is longer than 1829mm you'll need additional posts along it.
The brackets are finished in black powder-coated aluminium to match the rest of the system — rust-free, low-maintenance and built for year-round outdoor use.
Note that stair brackets are for angling rails down stairs. For horizontal corners that aren't 90° (such as an angled deck corner), you'll need swivel brackets instead.
Building a complete staircase balustrade? Stair brackets are part of our aluminium balustrade kit — the Build Your Own calculator has a stairs option that works out the brackets and parts you need for your run.
Yes — we accept returns of unused items in their original packaging within 30 days.
Please contact us before returning to confirm eligibility and process.
Yes. The system is made from aluminium with a durable powder-coated finish, making it:
Rust-resistant
UV-stable
Low maintenance
It’s designed for year-round outdoor exposure in UK conditions.
The stair brackets let your aluminium balustrade rails sit at an angle so the railing can follow the pitch of your stairs. Standard brackets hold rails horizontally; the stair brackets pivot so the rails run neatly down a flight of steps between your top and bottom posts.
Fit a post at the top and bottom of your stair run, then use the stair brackets to connect the rails at the angle of your steps. Measure your stair run along the slope (post to post, following the pitch) rather than horizontally. Our balustrade calculator has a "Stairs" option that works out the brackets and parts you need.
You'll need a stair bracket kit for each rail on the stair run (a top and bottom rail per bay). If your stair run is longer than 1829mm, you'll need additional posts along it, which affects how many brackets you need — the calculator works this out for you.
The stair brackets pivot to suit standard domestic staircase pitches, following the angle of your steps. For unusual or very steep angles, or if you'd like us to check your measurements, please use our quote form.
No — stair brackets are for angling railsdown stairs(following the vertical pitch). Swivel brackets are different: they're for horizontal corners that aren't 90° (such as an angled deck corner). If you're turning a non-right-angle corner on the flat, you need swivel brackets, not stair brackets.
Delivery Calculator
Enter your postcode to calculate delivery.
Delivery & Returns
Compliance
Safety & compliance
Our aluminium balustrade is designed and tested in line with BS 6180:2011,
the British Standard for barriers in and around buildings — so you can install it with confidence
around domestic decking, patios, balconies and stairs.
Tested to BS 6180:2011 — load-tested and certified for domestic (single-family) use, resisting a horizontal load of 0.36 kN/m (test report AR210)
1100 mm guarding height — meets the standard for domestic guarding
100 mm sphere rule — pickets at 96.5 mm spacing, so a 100 mm sphere cannot pass through
Corrosion-resistant — aluminium alloy 6005 with a batch-tested powder-coat finish (RAL 9017 matt black)
10-year warranty against material and finish defects
Maximum post span 1829 mm — full guidance in the data sheet
Is this balustrade compliant with UK building regulations?
It's designed and tested in line with BS 6180:2011, the British Standard referenced for barriers under Approved Document K. It's load-tested and certified for domestic single-family use (0.36 kN/m). For communal, commercial or public areas, higher load classes apply — speak to us or your building designer first.
How high is the balustrade, and is the gap child-safe?
The finished guarding height is 1100 mm, and pickets are spaced at 96.5 mm so a 100 mm sphere cannot pass through — meeting the gap requirement for domestic guarding.
Do you have test evidence I can show building control?
Yes — download our Compliance & Load Data Sheet above, which sets out the BS 6180 loads, our test results and the installation conditions.
Certified for domestic single-family use. For other applications, please contact us before ordering.
Build your own complete aluminium balustrade kit — a modern metal balustrade system you configure yourself, with exactly the posts, rails, brackets, spacers and end caps your project needs. Add an optional matching aluminium gate for access or safety. Our outdoor balustrade system suits...
Our aluminium balustrade rail kit contains everything you need for the rail sections of your balustrade — the horizontal part of the system that spans between your posts. Each kit includes the top and bottom rails (with vinyl inserts), pickets, spacers, top and bottom...
Our aluminium balustrade post is the structural upright of the balustrade system — a 75mm × 75mm square post finished in black powder-coated aluminium for a clean, modern look that won't rust, rot or fade outdoors. Each post stands 1140mm to the top of...
