Skip to content
Fast, Nationwide UK Delivery — Calculated at Checkout
Premium Outdoor Products — Built to Last in UK Weather
Expert Advice — Call 01282 526 428 or Request a Free Quote
UK-Based Specialists — Ordering Made Simple, Support All the Way

Glass Balustrade Cost: What Drives the Price and How to Budget

by Brett Lockwood 18 Nov 2026

Glass balustrade cost depends on four things more than anything else: the system you choose, the thickness and type of glass it needs, the shape of the run (corners, ends, gates and stairs) and whether the barrier is low level or guarding a drop of 600mm or more. A short, straight, low-level run in 10mm toughened glass is the cheapest way to use glass balustrade. A long frameless run in laminated glass, with corners and a stair section, sits at the top end. This guide explains each cost driver, compares the systems side by side and shows you how to get an accurate price before you order.

Satin stainless steel post and handrail glass balustrade around a raised stone patio

How Much Does Glass Balustrade Cost? Why There Is No Single Price

Most people search for a glass balustrade price per metre, and it is a fair place to start. The problem is that two runs of the same length can cost very different amounts. A 6m straight run needs end posts or end caps at each end and nothing else. A 6m run that turns two corners and finishes against a wall needs corner parts, a wall fixing and, often, extra panels cut to fit. The glass in both runs might be the same, but the parts list is not.

That is why a per-metre figure is only a rough guide. The more accurate route is to price your actual run: its length, its shape and the drop it guards. Our kit calculators do exactly that, and you can email yourself the quote to compare options.

The Five Factors That Set Glass Balustrade Prices

1. Low level or guarding

This is the first question, because it decides which systems you can use at all. Where the drop at the edge is 600mm or more, the guidance in Approved Document K calls for guarding. Below 600mm, a barrier is a design and safety choice. Low-level systems use lighter glass and fewer parts, so they cost less. Guarding systems need heavier glass, a handrail or a structural base, and they cost more. For the detail on heights and loads, read our guide to balustrade building regulations.

2. Glass thickness and type

Glass is usually the largest single item in the order. The systems we sell use three main types:

  • 10mm toughened glass: used in semi-frameless, side-mounted post and handrail, and spigot runs for drops under 600mm.
  • 17.5mm laminated toughened glass: two toughened sheets bonded together, used in spigot runs for drops of 600mm or more and in frameless channel runs.
  • 21.5mm laminated toughened glass: the heavier option for frameless channel runs.

The price gap between them is large. On our store on 15 November 2026, 10mm toughened stock panels were priced starting from £32.00 and 17.5mm laminated stock panels starting from £147.00. Laminated glass is also heavier, which matters when you plan how many people you need on the day of fitting.

3. Stock sizes or made to measure

Stock panels are the cheaper and quicker option. Stock glass dispatches in 3 to 10 working days. Made-to-measure glass takes 3 to 4 weeks. You will need made-to-measure glass where a run does not divide neatly into stock widths, on stairs where the panels are raked to follow the slope, and for tinted or frosted glass. Planning your post or channel layout around stock widths is one of the simplest ways to keep the cost down.

4. The shape of the run

Every end, corner and gate adds parts. On a post system, a corner needs a corner post. On a spigot system, corners may need stiffeners to tie the panels together. On a channel system, corners need corner channel pieces and ends need end caps. A gate adds a hinge and latch kit and a dedicated glass panel. Count the ends, corners and gates before you price anything, because they change the total more than a few extra metres of straight run.

5. Finish

Our stainless steel systems come in satin (brushed) or black, and the channel system comes in black or silver anodised aluminium. Prices differ between finishes on some parts and not on others, so compare the finishes in the calculator rather than assuming one is always dearer.

Satin stainless steel post and handrail fittings: saddles, end cap, wall flange and corner pieces

Glass Balustrade Cost by System

The table below compares the systems we sell. The relative cost column is a general guide based on the glass and hardware each system needs, not a quote.

System What it is for Glass Relative cost
Semi frameless glass balustrade Low level only, drops under 600mm. Not guarding. 10mm toughened Lowest
Side mounted glass balustrade Guarding for drops of 600mm and over, with posts fixed to the face of the deck or slab and a continuous handrail. Satin finish only. 10mm toughened Mid
Spigot glass balustrade Low level with 10mm glass, or guarding for drops of 600mm and over with laminated glass 10mm toughened or 17.5mm laminated Mid to high, depending on the drop
Frameless glass balustrade Guarding with no posts, the glass held in a base or side-fix channel 17.5mm or 21.5mm laminated Highest

Every system in the table is designed in line with BS 6180:2011. If you are guarding a raised deck or terrace and want a ready-made starting point, our glass guarding balustrade kits group the guarding options together.

Do not save money in the wrong place. Semi-frameless glass balustrade is sold for low-level use only, where the drop is under 600mm. It is not a guarding barrier, so it is not a cheaper alternative for a high deck or terrace. Choose the system for the drop first, then compare prices.

Costs People Forget to Budget For

The glass and hardware are the main costs, but they are not the only ones. Plan for these too:

  • Fixing bolts: these are not included with our systems. The bolt we recommend for masonry is M10 x 80mm to 100mm.
  • Delivery: free on balustrade orders of £2,000 inc VAT or more. Below that, delivery is £60.
  • Installation: we supply the balustrade only. We do not install, survey or cut to size, so fitting is a separate cost from your installer, or your own time if you fit it yourself.
  • The surface underneath: posts, spigots and channels need a solid fixing. If the deck frame or slab needs strengthening first, that work is part of the project cost.
  • Stairs: raked panels on a flight of steps are made to measure, so allow for the longer lead time as well as the cost.

Plywood templates in the base channel of a frameless glass balustrade on stone steps, used to make raked glass to measure

How to Get an Accurate Glass Balustrade Price

The fastest way to a reliable figure is to measure properly and price the run you actually have.

What you need

  • A tape measure and a sketch of the area from above
  • The drop at the edge, measured from the finished floor to the ground below
  • The surface you are fixing to (timber deck, concrete or stone)
  • The number of ends, corners, gates and wall junctions

Steps

  1. Measure each straight section of the run separately.
  2. Measure the drop. Under 600mm opens up low-level systems; 600mm or more means you need a guarding system.
  3. Pick two systems that suit the drop and the look you want.
  4. Build each one in the kit calculator and email yourself both quotes to compare.
  5. If the run has turns, steps or awkward ends, send us your measurements for a setting-out plan before you order.
Tip: We offer setting-out plans for all our balustrade systems. A plan shows where each post, spigot or channel length goes and which glass sizes you need, which helps you use stock panels wherever possible and keep the cost down. Start on our free balustrade quote page.

Glass Balustrade Cost FAQs

How much does glass balustrade cost per metre?

There is no fixed figure, because the price depends on the system, the glass thickness and the number of ends, corners and gates in the run. Low-level systems with 10mm toughened glass cost the least. Guarding systems with laminated glass cost more. Price your exact run in the kit calculator for an accurate figure.

What is the cheapest glass balustrade?

Semi-frameless is the lowest-cost system we sell, but it is for low-level use only, where the drop is under 600mm. For drops of 600mm or more, compare side-mounted, spigot and frameless options.

Why is frameless glass balustrade more expensive?

Frameless runs have no posts to support the glass, so they use thicker laminated glass (17.5mm or 21.5mm) held in a base or side-fix channel. The heavier glass is the main reason for the higher price.

Does the price include installation and delivery?

No installation is included, because we supply the balustrade only. Delivery is free on balustrade orders of £2,000 inc VAT or more and £60 below that. Fixing bolts are not included.

Price Your Glass Balustrade

Browse our full glass balustrade range, build your run in the kit calculator and email yourself the quote. Have an awkward layout or a set of steps? Send us your measurements for a free balustrade quote and a setting-out plan, or call 01282 526 428.

Prev post
Next post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose options

Edit option
Back In Stock Notification

Choose options

this is just a warning
Login
Shopping cart
0 items