All Products

The 978mm blank post is supplied plain — no clamps — for the points in a post & handrail balustrade where no glass fixes to the post: stepped ground, changes in level, and breaks in the run. It's a 42.4mm diameter post in 304...

The adjustable elbow lets the handrail tube change angle mid-run. Where a level balustrade meets a flight of steps, or a run follows a slope, the rail has to pivot — this fitting takes that angle and holds it, so the tube carries straight...

The wall flange fixes the end of the 48.3mm handrail tube to a wall — for runs that finish against the house, a garden wall or another structure, it anchors the rail securely and gives a clean, deliberate finish. It's 316 marine-grade stainless steel,...

The raised end cap closes the open end of the 48.3mm handrail tube, finishing the rail with a neat domed profile — no exposed tube ends, no sharp edges. Fit one at each open end of your run. It's 316 marine-grade stainless steel, matching...

The 48.3mm stainless steel handrail tube finishes a wire balustrade — it sits in the saddles pre-installed on every post top, giving a comfortable rail along the run and a finished height of 1100mm. It's 316 marine-grade stainless steel, matching the posts, wire and...

The Slate Grey 2.9m Composite Decking Trim provides a sleek, professional finish for decking installations. Designed to match modern grey decking tones, it adds strength, protection, and a clean edge to steps, borders, and transitions. Crafted from durable composite materials, the trim offers superior...

The corner post takes a wire balustrade around a change of direction. Wires from each side of the corner anchor to their own set of eyebolts — 7 each side, 14 in total, at 132mm centres — rather than bending around the post, which...

The mid post is where a wire run stops and starts again. It carries 14 M6 eyebolts — 7 on each of two opposite faces, at 132mm centres — so the wires arriving from one side anchor into their own set of eyebolts and...

The start/end post begins or finishes each run of a wire balustrade. It's a 48.3mm diameter post in 316 marine-grade stainless steel, with a welded base plate, a pre-installed saddle for the handrail tube, and 7 M6 eyebolts fitted — one anchor point per...

The swageless plain buckle connector terminates a wire run where adjustable tension isn't needed — typically the anchored end of the run, with a turnbuckle connector doing the tensioning at the other end. Thread the 3mm wire in and secure it with a locking...

The swageless turnbuckle connector tensions each wire in a wire balustrade — thread the 3mm wire in, secure it with a locking collar, and turn the body until the wire is taut with no visible sag. The swageless mechanical grip means no specialist swaging...

The locking collar secures 3mm wire rope inside the swageless connectors — it locks the wire in place so it can't slip, keeping the tension you've set with the turnbuckle or the hold of the plain buckle. Fitting is tool-free, like the rest of...

The eyebolt connector is the anchor point where 3mm wire rope meets the post — it threads into the post's M6 holes and the wire runs through the eye. Our wire balustrade posts come with their eyebolts already fitted, so this listing is the...

Our 3mm stainless steel wire rope is the cable that runs between the posts of a wire balustrade. It's 316 marine-grade stainless steel, so it resists corrosion through UK weather including coastal locations, and it's supplied in 10m, 50m and 100m lengths so you...

The post fitting adaptor ring gives you a wire anchor point where there isn't a pre-drilled hole — it fits around a 48.3mm post or tube and takes a wire fitting, so you can finish a run against a wall, connect into a plain...

The Anodised Channel End Cap completes the edge of frameless balustrade channel systems with a clean, durable finish. Engineered from aluminium and treated with a corrosion-resistant anodised surface, it provides protection against moisture and impact at channel terminations. The component offers a precise fit...

Our satin spigot glass balustrade kit holds clear glass on square Duplex 2205 stainless steel spigots, with no posts or base channel breaking up the view. The brushed finish suits timber, stone and brick, and works well on coastal and poolside sites. Glass follows...

The satin end cap closes the exposed end of our 30 × 28mm slotted top rail, finishing the rail profile cleanly where a run stops. Satin anodised aluminium, to match the satin rail and 90° corner. You need one at each open end of...

Our black spigot glass balustrade kit holds clear glass on square Duplex 2205 stainless steel spigots, with no posts or base channel breaking up the view. The black powder-coated finish is applied over the same Duplex 2205 steel as our satin kit, and suits...

Celebrate the colours of the season with the Artificial Hedging Extendable Autumn, a vibrant privacy screen that features rich red and green variegated foliage. Designed to replicate the beauty of fall leaves, this extendable hedge instantly transforms fences, balconies, patios, and garden walls into...