Products

The Ginseng Artificial Green Wall Panel is built from broad, lush ginseng leaves for a rich, full texture. It works as a feature wall, privacy partition, event backdrop or outdoor screen. Each panel measures 50cm x 50cm, so four panels cover one square metre....

The Ginseng Eucalyptus Artificial Green Wall Panel blends broad ginseng leaves with delicate eucalyptus sprigs for a layered, textured look. It turns plain walls into natural features in homes, cafés, spas and shops. Each panel measures 50cm x 50cm, so four panels cover one...

Our black glass balustrade channel is the base-fix aluminium channel behind a frameless glass balustrade. The glass stands in the channel and is held along its full bottom edge, so there are no posts, spigots or clamps on show. Every length comes with the...

Our silver anodised glass balustrade channel is the base-fix aluminium channel behind a frameless glass balustrade. The glass stands in the channel and is held along its full bottom edge, so there are no posts, spigots or clamps on show. Every length comes with...

Our black glass spigots hold the bottom edge of a glass panel upright from the floor, giving a frameless look with no posts or base channel. Each square spigot is Duplex 2205 stainless steel, powder-coated black over the same steel as our satin spigots....

Our satin glass spigots hold the bottom edge of a glass panel upright from the floor, giving a frameless look with no posts or base channel. Each square spigot is Duplex 2205 stainless steel, left as bare brushed steel, a good match for timber,...

The adjustable elbow lets the handrail tube change angle mid-run. Where a level balustrade meets a flight of steps, or a run follows a slope, the rail has to pivot — this fitting takes that angle and holds it, so the tube carries straight...

The corner elbow takes the handrail tube around a square change of direction. Where the balustrade turns a corner, the rail can't bend — this fitting joins the two lengths at 90 degrees and keeps the line crisp. The spigots are internal fit, so...

The in-line connector joins two lengths of 48.3mm handrail tube in a straight run — for runs longer than a single tube length, it gives a clean, flush joint so the rail reads as one continuous piece. It's 316 marine-grade stainless steel, matching the...

The long tee joins a branch of handrail tube into a main run without breaking it. Where a short return comes off the side of a balustrade — a stub back to a wall, or a return either side of a gate opening —...

The satin adjustable saddle bracket takes the handrail down stairs and slopes in the uncoated 316 range. Its head tilts to match the pitch, so the 42.4mm tube runs parallel to the staircase while the posts stay vertical — and being 316 marine-grade stainless...

The adjustable saddle is the fitting that holds the handrail tube on top of a post. Its head tilts, so the same saddle works on a level run and on a flight of steps — the post stays plumb while the rail follows the...

The wall flange fixes the end of the 48.3mm handrail tube to a wall — for runs that finish against the house, a garden wall or another structure, it anchors the rail securely and gives a clean, deliberate finish. It's 316 marine-grade stainless steel,...

The wall support bracket carries a 48.3mm handrail along a wall rather than on posts. Its spigot is adjustable, so the same bracket works on a level run and up a flight of steps — the bracket sits plumb on the wall while the...

The black height-adjustable elbow bracket mounts on top of the post and gives you two adjustments in one fitting: an extending stem that sets how high the 42.4mm handrail sits above the post, and a pivoting elbow head that sets the rail’s angle. That...

The satin height-adjustable elbow bracket is the post-top fitting for stair transitions in the uncoated 316 range. Its extending stem sets how high the 42.4mm handrail sits above the post, and its pivoting elbow head sets the rail’s angle — so a single fitting...

The Hidden Fixing Clip Kit (10m²) makes installing composite decking simple, efficient, and professional. Designed specifically for composite boards, this kit uses T-clips and screws to secure decking without visible hardware, creating a flawless, seamless finish. Covering approximately 10m² of decking, the kit contains...

The Satin Semi Frameless Glass Gate Kit provides a stylish and practical entryway solution for your balustrade system. This complete kit includes self-closing stainless steel hinges, a latch, a 10mm clear toughened glass panel pre-drilled to suit the fittings, and the fixings to install...

The Ignite Black 3.6m Capped Composite Decking Board from the Enhanced Range delivers premium appearance with long‑term durability. A protective cap improves stain, fade and UV resistance while the deep embossed woodgrain offers realistic texture and reliable grip. Each 3.6m length helps minimise joins...

Create bold, architectural picture-frame borders and durable stair nosings with Ignite Black — a premium finishing board engineered for strength, safety, and modern style. Featuring the same Deep Embossed square-edge profile as the main Ignite Black decking boards, this design includes no underside groove,...