Black

The black corner post turns a glass balustrade through 90°, carrying a 10mm toughened glass panel on each side of the corner. It is made from 304 stainless steel with a black powder-coated finish, in the same 42.4mm round profile and 1100mm height as...

The Black Semi Frameless Mid Post offers strength and symmetry while adding a contemporary style to your balustrade. With a durable black finish applied to 304 stainless steel, it is built for long-term outdoor performance. Supplied with four pre-fitted ‘D’ shape clamps, a welded...

The black wall flange anchors the end of a handrail into a wall. When a run of 42.4mm tube finishes against masonry or a building rather than in the open, the flange fits over the outside of the tube end and screw-fixes to the...

The 978mm corner post turns a post & handrail balustrade run through a change of direction — its four pre-fitted D-shape clamps hold a glass pane on each face of the corner (rubber gaskets included, for the system's 10mm toughened glass). It's a 42.4mm...

The 978mm mid post sits between glass panels along a post & handrail balustrade run, its four pre-fitted D-shape clamps holding a pane on each side (rubber gaskets included, for the system's 10mm toughened glass). It's a 42.4mm diameter post in 304 stainless steel,...

The 978mm end post starts or finishes a run in the post & handrail glass balustrade system. It's a 42.4mm diameter post in 304 stainless steel with a black powder-coated finish, with two D-shape glass clamps pre-fitted (rubber gaskets included, for the system's 10mm...

The black end cap finishes the exposed ends of our slotted cap rail cleanly, closing the rail profile for a professional look. It matches the black handrail for glass, which accepts panels from 10mm to 21.5mm thick. Allow one per exposed rail end —...

The black ‘D’ shape glass clamp grips a glass balustrade panel against a 42.4mm round post — the glass simply clamps in place through rubber gaskets, with no holes drilled in the panel. It is made from 304 stainless steel with a black powder-coated...

The black spigot base plate cover clips over the oval base plate of our square glass spigots, concealing the fixing bolts for a clean, professional finish at floor level. It's matched to the black powder-coated 316 stainless steel of our black spigots. Sold individually...

Our black glass spigots are the floor-mounted clamps at the heart of a spigot balustrade: each square spigot grips the bottom edge of a toughened glass pane, holding it upright with no posts and a frameless appearance. The spigot body is 316 marine-grade stainless...

Our aluminium balustrade support leg (also called the rail support foot) provides extra support to the bottom rail, helping keep it rigid and level across the bay. It adds strength and stability to your balustrade, keeping the rail properly supported along its length. The...

The black adjustable elbow is an in-line pivot for the handrail itself. It joins two lengths of 42.4mm tube directly — no post mount involved — and its pivoting joint lets the rail change angle mid-run, which is exactly what happens at the top...

The black in-line tube connector extends the handrail. When a balustrade run is longer than a single length of 42.4mm tube, the connector joins two tubes end-to-end in a straight line, so the rail carries on continuously rather than stopping and restarting. It is...

The fixed handrail saddle bracket is the connector between post and handrail on straight, level runs. It sits on top of the post, cradles the 42.4mm round handrail tube in its saddle, and the tube is then screwed to the saddle for a rigid,...

The black height-adjustable elbow bracket mounts on top of the post and gives you two adjustments in one fitting: an extending stem that sets how high the 42.4mm handrail sits above the post, and a pivoting elbow head that sets the rail’s angle. That...

The satin height-adjustable elbow bracket is the post-top fitting for stair transitions in the uncoated 316 range. Its extending stem sets how high the 42.4mm handrail sits above the post, and its pivoting elbow head sets the rail’s angle — so a single fitting...

The 978mm blank post is supplied plain — no clamps — for the points in a post & handrail balustrade where no glass fixes to the post: stepped ground, changes in level, and breaks in the run. It's a 42.4mm diameter post in 304...

Our black spigot glass balustrade system holds toughened glass panels on square 316-grade stainless steel spigots, giving your decking, patio or terrace a clean, frameless appearance without posts or a base channel breaking up the view. Each spigot is powder-coated black over marine-grade 316...

The black adjustable glass stiffener connects two glass panels at variable angles, with an adjustable body that lets you set the joint to your exact layout. Where panels meet at an angle that isn't a square corner or a straight line, it braces the...

Our black post and handrail glass balustrade system pairs 42.4mm round stainless steel posts with a continuous handrail and 10mm toughened glass panels — the classic glass balustrade configuration for decking, balconies, patios and raised terraces. Because the posts and handrail carry the structural...