Black

The aluminium balustrade post is the upright that carries your rails — a 75mm × 75mm square post in alloy 6005, finished in matt black powder-coat (RAL 9017) so it won't rust, rot or fade outdoors. Each post stands 1140mm to the top of...

The aluminium balustrade rail kit is the horizontal section that spans between your posts. Each kit contains the top and bottom rails with vinyl inserts, the pickets, spacers, top and bottom brackets, a rail support foot, and the stainless steel screws needed to assemble...

Aluminium balustrade stair brackets let your rails sit at an angle so the railing can follow the pitch of your stairs. Where standard brackets hold rails horizontally, these stair brackets pivot to match the slope of your steps, so your balustrade runs neatly down...

These Aluminium Balustrade Fixed Brackets are essential for securing horizontal rails in straight runs. Designed to create strong, clean connections between the rail and post, each bracket is made from powder-coated aluminium to match the rest of the system. Ideal for level sections of...

Our aluminium balustrade gate is a complete, self-contained access gate that matches the rest of the aluminium system — same black powder-coated finish, same picket profile, so it reads as part of the run rather than an addition to it. Rust-free, low-maintenance and built...

These Aluminium Balustrade Spacers are designed to ensure the even distribution of spindles along the top and bottom rail of your balustrade system. They help maintain consistent spacing, alignment, and a clean appearance throughout your installation. Each spacer is powder-coated aluminium to match the...

Our plastic rail end covers are small trims that finish the ends of your rails neatly where a rail meets a post. They cover the cut end of the rail for a clean, tidy appearance, giving your balustrade a properly finished look. End covers...

The black 90° glass stiffener joins two glass panels at a right angle, bracing the corner so both panes stay aligned and rigid. Where a post-free balustrade turns a corner, the two panes benefit from being tied to each other — the stiffener does...

The black 180° glass stiffener creates an in-line joint between two adjacent glass panels on a straight run, tying them together for extra rigidity with minimal visual interruption. On longer post-free runs, linking neighbouring panes stiffens the whole line — without adding hardware at...

Our aluminium balustrade swivel brackets let your rails connect at angles other than 90°, so your balustrade can follow a corner that isn't square — for example, an angled deck edge or an irregular patio shape. The bracket pivots horizontally to match the angle...

Our black handrail for glass is a slotted cap rail that fits along the top edge of the glass panels in a post-free balustrade — adding a graspable rail and extra stiffness across the run while keeping the glass-led look. The slot accepts glass...

This is the handrail. The black stainless steel tube is the 42.4mm round rail that runs along the top of a post and handrail balustrade — it sits in the saddle brackets on each post, is cut to size on site, and is fixed...

The black wall-mounted glass stiffener secures the end of a glass panel to a wall or other vertical structure, anchoring the run where it terminates against the building. It gives the final pane a solid fixing point and keeps the whole line rigid —...

The black adjustable saddle bracket carries the handrail down staircases and slopes. Where a fixed saddle holds the 42.4mm tube level, this bracket’s head tilts, letting the rail sit parallel to the stair pitch while the posts stay vertical. It is 304 stainless steel...

The black 90° handle for glass carries our slotted cap rail around a right-angle corner, keeping the rail line continuous where the balustrade turns. It matches the black handrail for glass, which accepts panels from 10mm to 21.5mm thick. Use one per right-angle corner...

The black 90° flush angle scroll end is the finishing piece for the handrail. Wherever a run of 42.4mm tube finishes in the open — rather than at a wall or around a corner — the scroll end inserts into the open tube end...

The black 90° end elbow handrail bracket takes the handrail around a right angle. Where a balustrade run turns a corner, this bracket sits at the post and joins the two lengths of 42.4mm tube through a fixed 90° elbow, keeping the rail continuous...

The black end post starts or finishes a straight run of glass balustrade. Made from 304 stainless steel with a hard-wearing black powder-coated finish, the 42.4mm round post stands 1100mm high and comes with a welded base plate and cover collar for a clean...

The black post cap is the flat top, glue fit cap that finishes each 42.4mm round post in the Semi-Frameless Glass Balustrade System in Black. Made from 304 stainless steel with a black powder-coated finish to match the posts, it is glued into the...

The black blank post is the clampless post in the range — the same 304 stainless steel, black powder-coated, 42.4mm round profile at 1100mm height, with a welded base plate and cover collar, but supplied plain with no glass clamps fitted. It is used...