Satin

The satin adjustable saddle bracket takes the handrail down stairs and slopes in the uncoated 316 range. Its head tilts to match the pitch, so the 42.4mm tube runs parallel to the staircase while the posts stay vertical — and being 316 marine-grade stainless...

The satin 90° glass stiffener joins two glass panels at a right angle, bracing the corner so both panes stay aligned and rigid. Where a post-free balustrade turns a corner, the two panes benefit from being tied to each other — the stiffener does...

The satin 180° glass stiffener creates an in-line joint between two adjacent glass panels on a straight run, tying them together for extra rigidity with minimal visual interruption. On longer post-free runs, linking neighbouring panes stiffens the whole line — without adding hardware at...

The satin mid post sits between two glass panels in a balustrade run, carrying glass on both sides through four pre-fitted ‘D’ shape clamps. It is made from uncoated 316 marine-grade stainless steel in a 42.4mm round profile at 1100mm height, with a welded...

The satin stainless steel tube is the handrail of the uncoated 316 range — the 42.4mm round rail that sits in the saddle brackets along the post tops, cut to size on site and screwed to the saddles for a rigid, continuous run. As...

The 978mm corner post turns a post & handrail balustrade run through a change of direction — its four pre-fitted D-shape clamps hold a glass pane on each face of the corner (rubber gaskets included, for the system's 10mm toughened glass). It's a 42.4mm...

The 978mm mid post sits between glass panels along a post & handrail balustrade run, its four pre-fitted D-shape clamps holding a pane on each side (rubber gaskets included, for the system's 10mm toughened glass). It's a 42.4mm diameter post in uncoated 316 marine-grade...

The 978mm end post starts or finishes a run in the post & handrail glass balustrade system. It's a 42.4mm diameter post in uncoated 316 marine-grade stainless steel with a satin brushed finish, with two D-shape glass clamps pre-fitted (rubber gaskets included, for the...

The satin wall-mounted glass stiffener secures the end of a glass panel to a wall or other vertical structure, anchoring the run where it terminates against the building. It gives the final pane a solid fixing point and keeps the whole line rigid —...

The satin corner post takes a glass balustrade around a 90° turn, holding a 10mm toughened glass panel on each side of the corner with its four pre-fitted ‘D’ shape clamps. Like the rest of the range it is a 42.4mm round post at...

The satin stainless steel post cap finishes each 42.4mm round post in the Semi-Frameless Glass Balustrade System in Satin. It is uncoated 316 marine-grade stainless steel — the same corrosion-resistant specification as the satin posts — in a raised push-fit design that presses into...

The satin end post starts or finishes a run of glass balustrade in uncoated 316 marine-grade stainless steel — the grade chosen for coastal, poolside and exposed sites where corrosion resistance matters most. The 42.4mm round post stands 1100mm high with a welded base...

The satin adjustable elbow puts a pivot directly into the handrail. It joins two lengths of 42.4mm tube in-line, letting the rail bend to a stair pitch, a ramp or an off-square turn without any post-mounted hardware at that point. It is uncoated 316...

The 978mm blank post is supplied plain — no clamps — for the points in a post & handrail balustrade where no glass fixes to the post: stepped ground, changes in level, and breaks in the run. It's a 42.4mm diameter post in uncoated...

The in-line connector joins two lengths of 48.3mm handrail tube in a straight run — for runs longer than a single tube length, it gives a clean, flush joint so the rail reads as one continuous piece. It's 316 marine-grade stainless steel, matching the...

The satin adjustable glass stiffener connects two glass panels at variable angles, with an adjustable body that lets you set the joint to your exact layout. Where panels meet at an angle that isn't a square corner or a straight line, it braces the...

Our satin handrail for glass is a slotted cap rail that fits along the top edge of the glass panels in a post-free balustrade — adding a graspable rail and extra stiffness across the run while keeping the glass-led look. The slot accepts glass...

The satin spigot base plate cover clips over the oval base plate of our square glass spigots, concealing the fixing bolts for a clean, professional finish at floor level. It's matched to the brushed 316 marine-grade stainless steel of our satin spigots. Sold individually...

Our satin glass spigots are the floor-mounted clamps at the heart of a spigot balustrade: each square spigot grips the bottom edge of a toughened glass pane, holding it upright with no posts and a frameless appearance. The spigot body is brushed 316 marine-grade...

Our satin post and handrail glass balustrade system is the 316 marine-grade version of our classic posts-plus-continuous-handrail configuration: brushed 42.4mm stainless steel posts and rail with 10mm toughened glass between them. Because the satin system's steel is uncoated 316, the metal itself is the...