All Products

The side fix internal corner post turns a run of our side mounted post & handrail glass balustrade around an inside corner, where the structure turns inwards. It's a 42.4mm diameter post in uncoated 316 marine-grade stainless steel with a satin brushed finish, with...

The side fix external corner post turns a run of our side mounted post & handrail glass balustrade around an outside corner, such as the corner of a raised deck or balcony. It's a 42.4mm diameter post in uncoated 316 marine-grade stainless steel with...

The side fix mid post sits between glass panels in a run of our side mounted post & handrail glass balustrade, where the posts fix to the face of the structure (the edge of a deck, landing, balcony or stair string) instead of on...

The side fix end post starts or finishes a run of our side mounted post & handrail glass balustrade, where the posts fix to the face of the structure (the edge of a deck, landing, balcony or stair string) instead of on top of...

The satin 90° handle for glass carries our slotted cap rail around a right-angle corner, keeping the rail line continuous where the balustrade turns. It is a pre-formed corner in the same 30 × 28mm profile as the straight rail, in satin anodised aluminium,...

The rubber gasket is what grips the glass inside our 30 × 28mm slotted top rail. The rail itself is one profile that suits any glass from 8mm to 21.5mm — it is the gasket that sizes it to your panels, so you choose...

The internal connector joins two lengths of our 30 × 28mm slotted top rail end to end. It slides inside the rail and is sealed by the rubber gasket, so the joint closes up neatly with no welding and nothing visible on the outside...

21.5mm clear toughened laminated glass panels in stock sizes, 1087mm high in seven widths. Because these are standard sizes rather than cut to order, they are dispatched in around 7 working days instead of the 3–4 weeks a made-to-measure pane takes. Laminated glass is...

17.5mm clear toughened laminated glass panels in stock sizes, 1087mm high in seven widths. Because these are standard sizes rather than cut to order, they are dispatched in around 7 working days instead of the 3–4 weeks a made-to-measure pane takes. Laminated glass is...

12mm clear toughened glass panels in stock sizes, 1087mm high in seven widths. Because these are standard sizes rather than cut to order, they are dispatched in around 7 working days instead of the 3–4 weeks a made-to-measure pane takes. 12mm glass is a...

The gate latch assembly holds a tube-framed gate shut. Both halves cradle round tube, clamping to the 48.3mm gate stile and the closing post or second leaf with no welding. The catch adjusts across a 15–35mm gap, so it takes up the tolerance you...

The gate hinge assembly hangs a tube-framed gate from a 48.3mm post. Both halves cradle round tube, so the hinge clamps to the post on one side and the gate stile on the other with no welding and no drilling of the post. It...

The wall support bracket carries a 48.3mm handrail along a wall rather than on posts. Its spigot is adjustable, so the same bracket works on a level run and up a flight of steps — the bracket sits plumb on the wall while the...

The flush angle scroll end turns the end of a handrail down and back through 90 degrees, closing the run with a returned end rather than a blunt stop. It's the traditional way to finish a handrail at the bottom of steps or at...

The flat end cap closes the open end of a 48.3mm handrail tube with a flush, square finish — no exposed tube end, no sharp edge. It's a glue-fit cap, so it bonds into the tube rather than being hammered home. Fit one at...

The long tee joins a branch of handrail tube into a main run without breaking it. Where a short return comes off the side of a balustrade — a stub back to a wall, or a return either side of a gate opening —...

The corner elbow takes the handrail tube around a square change of direction. Where the balustrade turns a corner, the rail can't bend — this fitting joins the two lengths at 90 degrees and keeps the line crisp. The spigots are internal fit, so...

The adjustable saddle is the fitting that holds the handrail tube on top of a post. Its head tilts, so the same saddle works on a level run and on a flight of steps — the post stays plumb while the rail follows the...

The plain post is an undrilled 48.3mm post for stair and sloping runs. On a slope the wires follow the pitch of the steps, so the holes have to be angled to match — something no factory-drilled post can do. This post arrives with...

The through post carries the wires along a straight run without interrupting them. It's drilled with 7 plain 6mm holes at 132mm centres — no eyebolts — so each wire passes straight through the post in one piece and carries on to the next...